Data Sheet for Product

Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as
design improvements are introduced. APOGEE and Insight are registered trademarks of Siemens Industry, Inc. Other product or company
names mentioned herein may be the trademarks of their respective owners. © 2010 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
U.S.A
Your feedback is important to us. If you have
comments about this document, please send them
to [e-mail].
Document No. 149-972
Printed in the USA
Page 2 of 2
Specifications
Agency Listings
See the Electric to Pneumatic Transducer and
Enclosures Technical Specification Sheet (149-277P25)
Agency Compliance for Pneumatic Kits
See the Electric to Pneumatic Transducer and
Enclosures Technical Specification Sheet
Backplane Dimensions not including AO-P Transducer 19” H × 17” W × 0.5" D (565 mm × 535 mm × 12.7 mm)
Depth including mounted AO-P Transducers 3.5"D (89 mm)
Ordering Information
Description Part Number
Perforated backplane 9.5” H × 17” W × 0.375” D, four 3.5” wire tie
bars, and power terminal with cord.
PXA-EXTDR-0.SM
Perforated backplane 20” H × 17” W × 0.375” D, five 3.5” wire tie
bars, and power terminal with cord.
PXA- EXTDR-0.LG
Perforated backplane 9.5” H × 17” W × 0.375” D with 4 pre-piped AO-
P Transducers installed with signal wires and power cord, four 3.5”
wire tie bars.
PXA-AOPKIT.4
Perforated backplane 20” H × 17” W × 0.375” D with 8 pre-piped AO-
P Transducers installed with signal wires and power cord, five 3.5”
wire tie bars.
PXA-AOPKIT.8
AO-P Transducer, 0-10 Vdc input, 0-20 PSI 600 SCIM Fail Safe
output with Gauge, Manual Override with dry contact indication, 0-5
Vdc feedback, listed for use with controller performing Smoke Control
functions: this is a single unit with no terminal block, signal wiring, or
pneumatic lines.
545-113