Installation Instructions

Document No. 553-131
Installation Instructions
August 16, 2013
Information in this publication is based on current specifications believed correct at the time of publication. The right is reserved to make
changes as design improvements are introduced. APOGEE and Insight are registered trademarks of Siemens Industry. Other product or
company names mentioned herein may be the trademarks of their respective owners. © 2013 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
USA
1-847-215-1000
Your feedback is important to us. If you have
comments about this document, please send
them to
[e-mail]
.
Document No. 553-131
Printed in the USA
Page 4 of 4
Figure 3. Placement of the 192 VA Service Box in a 19 inch PX Series Enclosure.
Figure 4. 192 VA Service Box Connections
2
.
2. 192VA model connectors will fit one 12 gauge wire, one 14 and one 16 gauge wire or three 16 gauge or smaller wires.