User Guide

Introduction to Application MC
Features
4
Siemens Industry, Inc.
A6V10574894
2017-06-30
Introduction to Application MC
Application MC (Monitor & Control) is a FIN Builder Project that contains a Navigation
Tree and application graphics for many of the available MS/TP FLN device
applications. By selecting this project from within Kiosk mode, you can view the current
values of control applications, command control values, acknowledge alarms, and
update the navigation tree to display devices that have been added to or removed from
the field panel’s database.
Application MC is accessible through a browser and contains several pre-defined
graphics for use with TEC applications, such as Unit Vents, Heat Pumps, and VAV
controllers.
● Graphics for VAV applications include a
Flow Balancingdrop-down window for
entering balancing settings.
● Graphics for Heat Pump applications contain a
Configuration drop-down window
for entering configuration settings.
Application MC is deployed to the field panel using Launch Pad. It is provided as an
example of the types of graphics that can be created using the FIN Builder product.
Features
Application MC allows you to:
● View the MS/TP FLN devices that have been added to the host field panel.
● Monitor the current value of application points using a graphical interface.
● Command points using graphical interface.
● View and acknowledge alarms.
● Manage Flow Balancing settings for VAV applications.
● Manage Configuration settings for Heat Pump applications.
● View available Application Notes.
Compatibility
Field panel type to
which Application MC
is deployed
Siemens Modular or 36 (Compact series) controller with a
USB memory storage device plugged into the USB port
(Drive
B).
Firmware Revision
3.3.1 or later
Internet browser
● Must support Flash Player 25.0.0.x or later, such as
Microsoft Internet Explorer (IE) 9, 10 or 11, Edge 25 or
later, Chrome, or Mozilla Firefox.
● Cookies must be enabled.