Operating Instructions

Navigation Tree Login
 Automatic Login: Only one account can be set
up to log in automatically.
1. Push the dial. The screen will activate with
Automatic Login highlighted.
2. Press the dial to log in.
NOTE: For instructions on setting up
automatic login, see the APOGEE P2 ALN
Field Panel User's Manual (125-3019) or the
APOGEE BACnet ALN Field Panel User's
Manual (125-3020).
 Manual Login:
1. Push the dial.
2. Rotate the dial to scroll to Manual Login.
3. Press the dial to select.
4. Rotate the dial to scroll through characters.
5. To select a character, press the dial.
6. When finished entering user name and
password, press the dial.
A
larms
 UnAcked: Displays only points in alarm which
have not yet been acknowledged.
 Alarms: Displays all points currently in alarm,
including those which have been acknowledged.
 Faults/Failures: Displays a list of the current
status of all alarmable points in fault/failure,
including those which have been acknowledged.
Points
NOTE: Points are listed alphabetically in the Point
List.
 Command:
o Displays current point value.
o Rotate the dial to change point value.
o BACnet: select command priority.
o Press the dial to accept point value change.
o Press ESC to discard changes.
 Release Priority:
o BACnet: Rotate dial to select a point priority.
o P2: Rotate dial to choose response (yes/no).
o Press the dial to release the point.
o
Press ESC to return to previous screen.
Point Monitor (PXM10S model only)
 Configure:
o Rotate the dial to select points to
configure.
o Press the dial to add point to monitor list.
o Press ESC to return to previous screen.
 Reset: Removes all points from monitor list.
 Display:
o Rotate the dial to scroll through points.
o Press ESC to stop monitor and return to
previous screen.
Log Of
f
 Automatic log off: Occurs when unit has
been idle for a set period of time.
 Manual Log Off:
1. Rotate the dial to highlight Log Off.
2. Press the dial to log off.
Settings
 Text Color:
o Rotate the dial to toggle text color
between blue and white.
o Press the dial to accept selection.
o Press ESC to return to previous screen.
 Backlight Color (PXM10S model only):
o Rotate the dial to cycle between colors.
o Press the dial to accept selection.
o Press ESC to return to previous screen.
 Backlight Timeout:
o Use the dial to adjust from 0 to 240
seconds.
o Press the dial to accept selection.
o Press ESC to return to previous screen.
Commanding Points
From the Main Screen:
1. Rotate the dial to select POINTS. Press
the dial.
2. Select desired point. Press the dial.
3. Rotate the dial to change the value of
point.
4. BACnet: Rotate the dial to change
command priority.
5. Press the dial to confirm change.
A
larm LED Indications
 Off: No alarm/offnormal/fault/failure
conditions and no unacknowledged objects.
 Blinking: At least one unacknowledged
object is pending.
 On: There are alarm/offnormal/fault/failure
conditions, but have all been
acknowledged.
A
cknowledging Alarms
From the Main Screen:
1. Select ALARMS from Main Screen.
Press the dial.
2. Select UNACKNOWLEDGED ALARMS.
Press the dial.
3. Select the desired alarm. Press the dial.
4. Select YES. Press the dial.
Information in this publication is based on current
specifications. The company reserves the right to make
changes in specifications and models as design
improvements are introduced. Product or company names
mentioned herein may be the trademarks of their
respective owners.
© 2012 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089
USA
+ 1 847-215-1000
Document No. 553-210
July 24, 2012