Operation Manual

9
AL180 / IM-NORD EN / A31008-M2003-R201-1-9W19 / main.fm / 21.10.2008
Locating a handset ("paging")
You can locate your handset using the base station.
◆ Briefly press the registration/paging key on the
base station
(¢ p. 1).
◆ All handsets will ring simultaneously ("pag-
ing"), even if the ringer tones are deactivated.
End paging: briefly press the register/paging key
on the base station
(¢ p. 1) or the talk key c on
a handset.
Registering handsets
You can register up to four handsets on your base
station (Gigaset
AL18H) recommended).
For automatic registration of handsets to
Gigaset
AL180, see ¢ p. 5.
Manual registration of handsets to Gigaset AL180
1. On the handset: MENU ¢ Settings ¢ OK
¢ Handset ¢ OK ¢ Register HS ¢ Enter the sys-
tem PIN of the base station (default is 0000) ¢ OK.
Registering flashes in the display.
2. On the base station: within 60 sec. of entering
the system PIN, press and hold the registration/
paging key
(¢ p. 1) (min. 3 sec.).
Registration takes approx. 1 minute.
De-registering handsets
Handsets can only be de-registered by resetting
the base station to its default settings. This will
also reset every other setting
¢ p. 10.
If you have only registered handsets for other GAP-
compatible devices, these can only be de-regis
-
tered with a hardware reset ¢ p. 10.
Using several handsets
Making internal calls
Internal calls are free calls to other handsets that
are registered to the same base station.
To make a call to other handsets, press
◆ INT ¢ ~ (1...4, enter internal number of the
handset)
¢ OK, the handset is called or
◆ INT ¢ star key P ¢ OK, all handsets are
called.
When a participant answers you can speak to
them. To end the call, press
a.
Internal consultation call/connecting
a call
You are in conversation with an external partici-
pant. Press the INT key and call one or all handsets.
The external participant hears the hold music.
◆ Before the internal participant has answered,
press the end call key
a; the call is diverted to
the participant who answers the call.
◆ After the internal participant has answered,
you can talk to him. Press the end call key
a;
the call is diverted, or press the display key
;
you are reconnected to the external participant.
Listening in to an external call
You are conducting an external call. An internal
participant can listen in on this call and take part in
the conversation (conference).
Precondition: The Listening in function must be
activated.
Activating/deactivating listening in
MENU ¢ Settings ¢ OK ¢ Base ¢ OK
¢ Listening in ¢ OK (‰ = on)
Internal listening in (conference)
You want to listen in to an existing external call.
Briefly press and hold the c key. You can listen in
to the call. All participants hear a signal tone.
To end: press the end call key a. All participants
hear a signal tone.
If the first internal participant presses the end call
key
a, the handset that has "listened in" remains
connected to the external participant.
Setting the alarm clock
Activating/deactivating the alarm clock
MENU ¢ Alarm Clock ¢ OK ¢ Activation
¢ OK (‰ = on)
When activated:
¢ Set the wake-up time ¢ OK
When the alarm clock rings, press any key to switch
it off for 24
hours. If the alarm clock is set, the
wake-up icon
9 will appear on the screen and the
wake-up time will be displayed instead of the date.
Setting the wake-up time
MENU ¢ Alarm Clock ¢ OK ¢ Wake-up time ¢ OK
Enter the wake-up time in hours and minutes, then
press
OK.
Please note:
Each additional handset must be registered on
the base station in order for it to work properly!