User Manual

10/14
Siemens Energy Manager / Heating Conroller RVP540 / RVP550 CE1N2488en
Building Technologies 04.11.2009
C
0 4 8 12 162024
1 2 3 4 5 6 7 8 9 10
°C
20
26
14
Info
6
5
4
1
7
8 9
2392Z54
10
3
2
Setting knob for the room temperature
Adjustment of the nominal room temperature setpoint
Operating mode button for d.h.w.
D.h.w. on / off
Manual d.h.w. push
Setting buttons
Setting the parameters (+ / -)
Button for manual operation with LED
Manual operation on / off
Line selection buttons (Prog)
Selection of parameters / lines
8
“Green“ button with LED
“Green“ operation on / off
LCD
Reading actual values and settings
9
Info button
Display of plant data
Operating mode buttons for the heating circuit
Choice of:
Automatic operation
Continuous operation
Standby
10
Service connector
Notes
• The wires of the measuring circuits carry extra low-voltage
• The wires to the actuator and the pump carry AC 24…230 V
• The local electrical regulations must be complied with
• Sensor cables should not be run parallel to mains carrying cables for loads such as
actuator, pump or burner.
Each unit is supplied with mounting and commissioning instructions.
Technical data
General unit data
Operating voltage AC 230 V +10 / –15 %
Nominal frequency 50 Hz (±6 %)
Power consumption max. 10 VA
Perm. ambient temperature
Transport and storage
Operation
–25…+70 °C
0…50 °C
Front of RVP540 and
RVP550
with cover opened
Engineering
Commissioning