User Manual

2 / 6
Siemens Handheld control AFK914/C01 CE1N2731en
Building Technologies 15.03.2010
Equipment combinations
The AFK914/C01 can be used together with the Siemens system Synco living.
Detailed information on the device combinations is available in the data sheet for
the central apartment unit.
Ordering
When ordering, please specify the quantity, product name, and type code.
The handheld control is delivered with the standard Lithium button-cell batteries,
type CR2032 and mounting instructions.
Type Stock number Name
AFK914/C01
S55621-H105-C901
Handheld control
Product documentation
Operating and commissioning instructions for the AFK914/C01 are included in the
product documentation for the central apartment unit.
Functions
The radio handheld control becomes active and the LED is blue for a maximum of
2 seconds if you press a button on the integrated handheld control for more than
0.7 seconds. A corresponding telegram is sent to the central apartment unit and
the command in question is executed. The central apartment unit then returns a
confirmation telegram back to the handheld control. The handheld control is on for
ca. 2 seconds and waits for a confirmation of receipt. The receipt of the
confirmation telegram is optically displayed on the handheld control. The color
pattern displayed on the LED depends on the enabled function.
The LED flashes three times and the handheld control reverts to sleep mode if no
confirmation of receipt is received from the central apartment unit (receipt timeout)
within 2 seconds.
The button must be pressed for at least 0.7 seconds to send a telegram and
prevent unintended actions (e.g. caused by carrying the control in a pocket). All
buttons are locked when a button telegram is sent due to pressing a button until
the confirmation telegram is received from the central apartment unit and displayed
on the LED, or the receipt timeout expires.
Binding logs the AFK914/C01 on to the central apartment unit and thus integrates it
into the radio system. Press the two upper buttons from 5 - 20 seconds to trigger
the binding process. The function LED signals the process.
The battery level is checked each time a button is pressed and transmitted to the
central apartment unit in the form of a button telegram. The function LED signals
when the battery level drops below a certain level. The test result is positive if
battery capacity suffices for at least 100 actions (corresponding to a remaining
period of about one month at 2.5 actions per day).
Delivery
Order numbers
Main function
Binding
Battery status query