User's Manual

27
3 Operating the SAMMS-MV Device
SAMMS-MV
Function Number Function SAMMS-MVX SAMMS-MVE
F0 Ambient temperature
• •
F1 Control circuit number
• •
F2 Size for overload No. 1
• •
F3 Size for overload No. 2 (low speed)
•
F4 Full load current for OLR No. 1
• •
F4A 5A CT primary current (if used)
• •
F5 Full load current for OLR No. 2
•
F5A 5A CT primary current (low speed) (if used)
•
F6 Service factor
• •
F6A Motor type
• •
F7 Overload trip class (class 2 through 23)
• •
F7A Cold stall time
• •
F8 Automatic reset
•
F9 Phase unbalance
• •
F10 Time to restart
• •
F11 Emergency restart
• •
F12 Ground fault protection or warning
• •
F12A Ground fault pickup current
• •
F13 Timer No. 1
• •
F14 Timer No. 2
• •
F15 Motor current
• •
F16 Last trip current
• •
F17 Percent unbalance current
• •
F18 Total elapsed run-time on motor
• •
F19 Total number of motor starts
• •
F20 Number of overload trips
• •
F21 Reset motor data
• •
F22 Set process current warning
•
F23 Jam protection
•
F23A Jam pickup current
•
F24 Loss of load protection or warning
•
F24A Loss of load pickup current
•
F25 Motor winding temperature as % of full load temperature
• •
F26 Baud rate
• •
F27 Address
• •
Table 3.7 SAMMS-MV models and functions