User`s manual

2000590-001 Data Communications Setup •• 31
Establishing a Connection, Continued
The following procedure assumes that the Windows Hyper Terminal pro-
gram residing on your PC has been configured, the ANG_EN is opera-
tional and the PC is connected to the ANG_EN.
1. Open Windows Hyper Terminal program on your PC or double click
the shortcut icon to start; See Configuring PC.
2. Press ↵↵ Enter twice.
The following dialog box appears
3. At the >> prompt type: login password and press ↵↵ Enter.
The Connect Screen will appear with the log in information and the
local prompt. The local prompt indicates that your are communicating
with the ANG_EN connected directly to the PC.
2.0.1
You are now ready to configure the Advance Network Gateway
(ANG_EN) with its own Network Address and ADH Loop and Unit Num-
ber; go to page 33.
How to Log On