User`s manual

2000590-001 Advance Network Gateway •• 3
Specifications
Advance Network Communication Board (ANCB): 10BASE-T RJ-45 STP
connector
Data rate: 10Mbits/sec.
Maximum Cable Length Per Ethernet Specifications
Maximum length to adapter
concentrator/hub:
100m (328 ft)
Cable Type (minimum req.): AT&T D-inside wire (DIW &
PDS, IBM Type 3, Category 3 or
5 data grade cabling)
Cable Characteristics: 100 Ohms nominal impedance
248 Advance Units Maximum / 31 Units per Loop
8 Loops Maximum
Input Voltage
85-264 VAC, 47-63 Hz
Single Phase, Grounded Neutral
1 Ampere Maximum (<100 Watts)
Input Power
Terminal Strip for braided or solid 12 AWG (2.5mm
2
) maximum wire size
Data Hiway
Terminal Strip for dual or single pair Data Hiway cable
Interfaces
Laptop PC RS 232: 9-pin Sub D plug
Ethernet 10BASE-T: standard RJ-45 connector
Rack Mounted Package Configuration
See Figure 1-2 for Outline Drawing and Dimensions
Wall-Mounted Package Configuration
See Figure 1-3 for Outline Drawing and Dimensions
Zone 1 - Wall-Mounted Package Configuration
See Figure 1-4 for Outline Drawing and Dimension
Media Interface
Ethernet Specifications
Data Hiway Specifications
Power (Mains) Requirement
Electrical Connections
Dimensions