User`s manual

Obtaining Diagnostics Information
Description
You can access the following Diagnostic information from an Advance
Network Gateway (ANG_EN).
• Ethernet Network Status
• ADH Channels Status
• Error Log
Before You Begin
The following procedures assumes that the Windows Hyper Terminal
program residing on your PC has been configured, the ANG_EN is
operational, the PC is connected to the ANG_EN and you have logged
on.
Ethernet Network
Information
To display current Ethernet network diagnostic information:
1. Log on to the ANG_EN.
2. At the > prompt type: netstat net
The UDP and Interface Statistics screen will appear. The display
shows the number of packets received and transmitted and the
number of errors detected.
56 • Troubleshooting 2000590-001