User`s manual

Firmware Updates
Description
Periodically we will provide our ANG_EN users with firmware upgrades.
Perform the following instructions to download a new ANG_EN firmware
upgrade to the Communications board. A firmware upgrade will take
approximately 5 minutes.
Instructions
The following procedure assumes that the Windows Hyper Terminal
program residing on your PC has been configured, the ANG_EN is
operational and the PC is connected to the ANG_EN.
1. Log on to the ANG_EN.
2. At the > prompt type: download
You should see the following response on the screen. At this point
the ANG_EN Communications board is ready to receive the new
firmware version.
3. From the Main Menu bar click on Transfer.
2000590-001 Data Communications Setup • 43