User`s manual

Establishing a Connection, Continued
How to Log On
The following procedure assumes that the Windows Hyper Terminal
program residing on your PC has been configured, the ANG_EN is
operational and the PC is connected to the ANG_EN.
1. Open Windows Hyper Terminal program on your PC or double click
the shortcut icon to start; See Configuring PC.
2. Press ↵ Enter twice.
The following dialog box appears
3. At the > prompt type: login password and press ↵ Enter.
The Connect Screen will appear with the log in information and the
local prompt. The local prompt indicates that you are communicating
with the ANG_EN connected directly to the PC.
2.0.1
You are now ready to configure the Advance Network Gateway
(ANG_EN) with its own Network Address and ADH Loop and Unit
Number; go to page
33.
2000590-001 Data Communications Setup • 31