User`s manual

Pre Installation Planning, Continued

Figure 2-3: ANG_EN Fiber

Optics Installation

Figure 2-3 shows an ANG_EN in a 10BASE-T to fiber optic installation. Fiber

optic equipment including converters, hubs and interconnecting cable are not

provided by Siemens.

As shown in Figure 2-3, multiple ANG_EN units may be interconnected into a

single large system by using appropriate Ethernet hubs.

The APC (Advance Personal Computer) must be connected to a standard

segment of Advance Data Hiway via the Advance Personal Computer

Interface (PCI).

GC GC

ANG

FIBER

OPTICS HUB

ANG

GCGC

FIBER OPTICS

CONVERTER

ANG

PC-1

I/O Unit

Analyzer House

Distant

Analyzer House

Control Room

APC

FIBER

OPTICS

CONVERTER

dvance Data Hiway

dvance Hiway Data

STP (10BaseT)

from each

Gateway to

fiber optic hubs

or converters

2000590-001 Installation • 13