User`s manual

2000591-001 Command Summary •• 67
Command Summary, Continued
This command is used to display statistics for the DataNET, Ethernet, or
OS memory buffers.
The command netstat dn displays the total statistics for all DataNET
ports.
The command netstat dn 1 displays the statistics for DataNET port one
only.
Example:
local> netstat dn 1
DataNET Statistics for DN link 1
Frames Sent 855
Frames Sent/Retried 0
Frames Sent/Redirected 0
Frames Sent w/ Errors 0
Frames Sent UnACKnowledged 0
Frames Received 859
Frames Receiver Not Ready 0
Frames Received w/ Errors 0
Link down 2
The command netstat dn clear resets all DataNET statistics counters.
The command netstat dn 2 clear resets only the port 2 statistics count-
ers.
The command netstat net displays the Ethernet statistics for TCP, UDP,
and the Ethernet Interface.
TCP Statistics
Segments Received 12
Segments Sent 12
Current Connections 0
Connections Reset 0
Failed Connections 0
Segments Retransmitted 0
UDP Statistics
Datagrams Received 991
Datagrams Sent 991
Receive Errors 0
Unknown Ports 0
netstat