User`s manual

66 •• Command Summary 2000591-001

Command Summary, Continued

There is a continuous listing mode for monitoring all the messages in the

internal trace buffer. It is set by entering list on. All the messages in the

internal buffer will be displayed and any new messages will be listed as

soon as they are collected into the buffer. The continuous listing mode is

terminated by pressing any key.

To clear all events from the event buffer, use

list clear

The login command allows the user to access all the ANCB parameters

and diagnostic information. The format is:

A password can contain any alphanumeric character and must be be-

tween 5 and 20 characters in length. See the password command for

information on how to change the user password.

Users can login to a remote ANCB or DataNET HUB by first logging out

of the local device and then typing:

address of the remote device.

The logout command is used to log the user out of either the local or re-

mote device. Note: User’s will be automatically logged out after five min-

utes of non-activity unless the user has issued the timeout off com-

mand. Also the user must be logout of the local device before logging

into a remote device. See the login command.

logout