User`s manual

56 •• Data Communications Setup 2000591-001
Firmware Updates
Periodically we will provide our ANG users with firmware upgrades. Per-
form the following instructions to download a new ANG firmware upgrade
to the ANCB board. A firmware upgrade will take approximately 5 min-
utes depending upon the speed of your PC hardware.
The following procedure assumes that the Windows Hyper Terminal pro-
gram residing on your PC has been configured, the ANG is operational
and the PC is connected to the ANG.
1. Log on to the ANG.
2. At the >> prompt type: download
You should see the following response on the screen. At this point
the ANCB is ready to receive the new firmware version.
3. From the Main Menu bar click on Transfer.
Description
Instructions