User`s manual

54 •• Data Communications Setup 2000591-001
Editing the Address Translation Table, Continued
1. To delete a single entry from the ATT type: del adh loop unit
Where loop is the ADH loop number (1 - 8) and unit is the ADH unit
number (1-31).
All parameters must be specified.
2. To delete all ATT entries associated with a single IP address type:
del ip xxx.xxx.xxx.xxx
Where xxx.xxx.xxx.xxx is the IP address in dotted decimal notation.
Note: 255.255.255.255 and 0.0.0.0 are not allowed.
Editing the ATT