User`s manual

52 •• Data Communications Setup 2000591-001
Editing the Address Translation Table, Continued
The Address Translation Table (ATT) can be displayed using the
Configuration Management routines.
1. Connect a standard 9-pin COM cable from the designated PC COM
(see Figure 2-7) to the Channel A ANCB Configuration Ports.
2. Open Windows HyperTerminal program on your PC; reference Con-
figuring Your PC, page 40.
3. Connect and Log on to ANG; reference Establishing a Connection,
page 44.
4. To display the entire ATT type at the Local >> prompt: display all
Displaying the ATT