User`s manual

2000591-001 Data Communications Setup •• 43
Configuring Your PC, Continued
11. Click Settings tab.
12. From the Emulation scroll list select VT100. Do not change the de-
fault settings for the other parameters.
13. Click Terminal Settings button.
The Terminal Settings dialog box will appear.
14. Click OK to accept the default settings.
The Advance Network Gateway Properties box will appear.
15. Click ASCII Setup button.
The ASCII Setup dialog box will appear.
16. Click OK to accept the default settings and return to the Settings
tab.
17. Click OK to return to main menu.
18. Enter the short cut name. Click Save to complete the setup.
Your PC is now setup to connect to and configure the ANG.
To create a shortcut to the new connection you just entered and place it
on your Desktop, select the file name you entered in step 18 and click
the right mouse button. From the pop-up menu select Create Shortcut.
Once the shortcut is created it can be moved to the Desktop. Simply click
the shortcut icon and drag the icon while holding down the left mouse
button. Release the mouse button to place the icon.