User`s manual

40 •• Data Communications Setup 2000591-001
Configuring Your PC
The Advance Network Gateway (ANG) provides a user interface called
CLI (Command Line Interface). Any communication program capable of
VT100 terminal emulation can be used to communicate with the CLI in-
terface. The Windows Hyper Terminal is the recommended communi-
cation program.
Baud rate: 57.6k baud
Data bits: 8
Parity: none
Stop bits: 1
Flow control: none
The following procedure uses the Windows HyperTerminal program, to
connect to the ANG.
1. Click the Start button, and then click on Programs.
2. Click the HyperTerminal icon to start the Program.
Connection Description dialog box will open.
3. In the Name field, type in a Connection Name. Example: Advance
DataNET Gateway.
4. In the Icon field select an Icon to represent the name selected.
Description
Instructions