User`s manual

2000591-001 Installation •• 17
Wall or Rack Mounting Installation, Continued
The ANG rack mount configuration is designed for a standard 19-inch
cabinet. The cabinet should have at least seven inches of vertical space
for mounting the unit. See Figure 1-2 for minimum width and depth
mounting dimensions.
For installation sites that must conform to CE (Conformite Europeene)
Certification see page 22, CE Installations.
The wiring routing and entry requirements for the ANG are dependent
upon the site requirements; see page 18, Site Wiring Requirements:
• CE (Conformite Europeene) Certified Area; see Page 22
• NEC Division 2 or Non-Hazardous Areas
• Cenelec Zone 1 or Zone 2 Areas
• Rack Mounting Non-Hazardous Area.
Rack Mounting
CE Installations
Wiring Requirements