User`s manual

2000591-001 Installation •• 15
Pre Installation Planning
This section provides information that can help you in preplanning your
installation.
Before installing the Advance Network Gateway (ANG) within an existing
LAN consult with your LAN administrator.
The ANG is designed for wall or 19-inch rack mounting. Figure 2-1
shows the ANG wall mounted in an analyzer house. Note that the AC
Power (Mains) breaker is located in close proximity of the ANG. Also
note the I/O connections to the ANG_DN.
POWER & CABLE
CONNECTIONS
AC BREAKER
PROTECTION
Figure 2-2 illustrates how a ANG can be used to physically extend a sin-
gle loop of the Advance Data Hiway (ADH) by providing a conversion
from the ADH media to Ethernet, or DataNET and back to the ADH me-
dia.
All segments of the system labeled “Advance Data Hiway” are according
to standard installation practices (9182 Belden cable or equivalent); see
Chapter 1. ANG_DN Specifications; page 4.
Distant Analyzer House
GC GC GC
GC GC
GC
APC
Control
Analyzer House
Analyzer House
Advance
Network
Advance Data Hiway
Advance
Data Hiway
Advance Data Hiway
GC
I/O Unit
ANG
ANG
Hub
ANG
or STP
Description
CAUTION
Figure 2-1. Wall Mounted
ANG
Figure 2-2. ANG_DN
Installation