Troubleshooting guide

4-8 Optiset E Administrator Guide
Note:
The OptiGuide feature can be enabled or disabled on the
Optiset E Liberator phone. If you choose to turn this option
off, you can program the three keys that are reserved for
OptiGuide to be used as feature keys. For information on how
to enable or disable the OptiGuide feature, see the procedure
“To enable/disable OptiGuide” on page 4-8.
Display
The Optiset E Liberator telephone has a 2-line by 16-character display
as oppose to the 2x24 characters display in other Optiset E telephones.
The display provides useful information about the status of the phone
in idle or connected state. When a text line contains more than sixteen
characters, it will be compressed and truncated to fit the 16-character
display. The display is automatically disabled after one minute of
inactivity. The display is re-activated immediately when you press the
Talk key or any function key.
OptiGuide User Interface
The Siemens OptiGuide user interface provides a variety of useful
information such as the time and date and the name and extension
number of an internal party who is calling the phone. It displays some
of the features available to the phone, depending on the phone’s
current state (idle or connected) and provides prompts on how to use
them. Refer to “Using the OptiGuide Display” on page 3-22 for
information on how to use the OptiGuide menus to access available
features.
To enable/dis-
able OptiGuide
➩
In Standby mode, press and hold the * and
# keys simultaneously then press the
TALK key. You will hear the beep tone
when the phone enters the Training mode.
➩
Press the ‘0’ key to toggle the option to On
or Off. The display will indicate the status
of the option after you change it.
➩
Press the TALK key to exit the Training
mode when you have finished.