Troubleshooting guide

3-28 Optiset E Administrator Guide
— Display? - to activate all pixels in the display.
— Key? - to sound as each key is activated and show key code for
function keys.
— Audio tests? - to sound ring volume, ring tone, and alert tone.
— Asset ID? - to display the phone’s asset ID number.
— Firmware version? - to display the phone’s firmware version.
— Power level? - to show whether an Optiset E Local Power
Supply is needed for the phone.
— Exit? - to return to the time and date screen.
Note:
For more detailed information on the Phone Test, see “Phone
Test” on page B-4.
The user can press the Program key, if one exists on the phone,
to reach the Program/Service? prompt.
There are also service code numbers in the lower left of the
subprompts available through the Program/Service prompts.
From the Program/Service prompt, the user can dial these
numbers to go directly to these submenus. Similarly, the
subsections within the submenus have numerals that the user
can dial to go to those subsections. For a list of these numbers,
see Appendix D, “Service Codes.”
Audio Settings?
(also available from the Program/Service menu) lets
the user adjust the following audio settings for the phone:
• ring volume? - to sound ring tone at presently set volume.
• ring tone? - to sound ring tone at presently set tone.
• alert tone volume? - to sound alert tone at presently set volume.
• speakerphone mode? - to display presently set speakerphone mode.
Exit?
exits the Main Menu and returns to the time and date screen.
PROGRAM/SERVICE
>
1-Change destinations?