Troubleshooting guide

3-26 Optiset E Administrator Guide
— Call Forwarding? - to forward calls to another extension or
outside number. (See “Forwarding” on page 7-1.)
— Repdials? - to set up keys for one-touch dialing. (See
“Repertory Dialing (Repdial)” on page 5-29.)
— Station Speed Dial? - to assign frequently used dialing
sequences to codes for easy dialing. (See “Station Speed
Dialing” on page 5-41.)
— Saved Number Redial? - to redial a number the user has saved.
(See “Saved Number Redial” on page 5-33.)
— Direct Station Select (DSS)? - to monitor and automatically
dial or answer an extension. (See “Direct Station Select (DSS)”
on page 5-15.)
— Return? - to return to the Program/Service Menu.
• Feature settings? - to display and activate or deactivate the
following features:
— Call Forwarding? - to forward calls to another extension or
outside number. (See “Forwarding” on page 7-1.)
— Do Not Disturb? - to block incoming calls. (See “Do Not
Disturb” on page 8-1.)
— Stop Hunt? - to use the No-Hunt feature to remove the user’s
phone from a Hunt group. A Hunt group is a group of phones
that move an incoming call from one member’s phone to
another until it is answered or the caller hangs up. (See “Hunt
Groups” on page 9-5.)
— Speaker Call Rejection? - to block incoming speaker calls. (See
“Speaker Call Rejection” on page 5-39.) This feature is not
applicable to the Optiset E Liberator telephone.
— Call Waiting Terminate? - to immediately alert the user with a
tone when a caller is trying to reach him with Busy Standby
Queuing.
— View Callbacks Sent? - to show whether the user has sent a
callback request to help him reach another extension. (See
“Callback Request” on page 5-5.)
— Return? - to return to the Program/Service Menu.