Troubleshooting guide

2-4 Optiset E Administrator Guide
Optiset E ISDN Adapter
The Optiset E ISDN Adapter lets the user connect ISDN S0 bus
devices such as phones, PC cards, LAN Bridges, G4 fax machines, and
video equipment to a phone via an RJ45 connector. It supports up to
64 kilobytes per second simultaneously on each bearer channel.
Note:
The Optiset E ISDN Adapter will only work properly in a
primary phone, not in a phone attached to another phone with
the Optiset E Phone Adapter. See “Optiset E Phone Adapter”
on page 4.
The user can only connect two ISDN devices to the adapter.
If a bay option module other than the Headset Adapter or
Headset Plus Adapter is installed on a phone, only one data
device can be attached to the ISDN adapter.
Optiset E Phone Adapter
The Optiset E Phone Adapter lets the user attach another Optiset E
phone to an Optiset E phone. It provides an RJ11 connector to attach
the second phone via a standard telephone cable up to 300 feet long.
The user can then place the second phone in an area not wired for a
phone. The attached phone is configured at the communications server
to be a completely independent phone with its own phone number.
Note:
The Optiset E Analog Adapter is not compatible with the
Optiset E Phone Adapter.
Optiset E Teleworking Adapter
The Optiset E Teleworking Adapter (OTA) is a component of the
Teleworking Application that enables an Optiset E display telephone
to be used by a remote teleworker or telecommuter. Once the option
module is installed, the Optiset E telephone will work with all of the
Hicom 300 E CS features available to the telephone when connected
directly to the communications server.