Troubleshooting guide

1-8 Optiset E Administrator Guide
•
Icons:
there are four fixed icons within the LCD display
specifically designed for indication of TALK mode, battery low
alert, LOCK mode, and message waiting notification.
•
AutoStandby:
automatically hangs up the call when you return the
handset to the charger.
•
AutoTalk:
automatically places the handset in Talk mode when
you pick up the handset from the charger while it is receiving a call.
•
Ringer volume control:
provides different settings for the ringing
pattern and vibration.
•
Handset volume control:
provides two settings for the speaker
volume when the handset is in Talk mode.
•
Mute function key:
mutes the microphone when the handset is in
Talk mode.
•
Ringer alert:
you can turn off the ringer so when an incoming call
is received, only the LED flashes unless the vibrator is turned on
using the Volume key.
•
Key pad lock feature:
you can enter a 2-digit code to lock the
handset. When in the Lock mode, outgoing calls cannot be placed
but incoming calls may be answered.
•
Out of range protection:
when you travel beyond the base
coverage area, you have 20 seconds to come back within range to
prevent the call from being disconnected.
•
Low battery protection system:
when you remove the battery
from the handset, the memory information is kept for at least 20
seconds.
•
Hot swapping battery:
while you are in Talk mode, you have 20
seconds to change the battery without dropping the call.
•
Separate charging stand with spare battery charging
capability:
the Charging Unit allows simultaneous charging of the
telephone and a spare battery pack through the use of a second
charging slot.
•
Spare battery:
the unit comes equipped with a spare battery.
•
Headset jack:
you can connect a headset into the jack on the
handset to place the handset into headset mode.
•
Wall mountable base unit:
you have the option to install your
base unit on a wall using the wall mount adapter.