Troubleshooting guide

9-8 Optiset E Administrator Guide
Leaving a Hunt Group
If the user wants to prevent hunt group calls from advancing to his
phone, he can use the No-Hunt feature to remove his phone from the
group. Hunt group calls will then skip his phone and advance to the
next phone in the group. This has no effect on calls placed directly to
his phone unless it is in Do Not Disturb mode. (See “Do Not Disturb”
on page 8-1.)
If all members of a
station hunt
group remove themselves, hunting
will not occur.
All but one of the members of a
pilot hunt
group can remove
themselves. If the last remaining member tries to leave the hunt group,
he or she will receive an error tone.
Setup
To set up your
station hunt
destination for
the first time
➩
Get a dial tone.
➩
Dial # * 9 0.
You will hear the confirmation tone,
followed by the dial tone. If you have a
display phone, STATION HUNT is
displayed.
➩
Dial the primary extension of the member
to whom you want to advance calls.
You will hear the confirmation tone. If you
have a display phone, STATION HUNT
and your destination are displayed.
➩
Hang up.
➩
Join your hunt group, as described on page
9–11.