Troubleshooting guide

7-12 Optiset E Administrator Guide
System Hold
System Hold lets the user move a call to a system slot (a temporary
holding place) and hold it there. The call can then be retrieved from
any extension.
To place a call on
system hold by us-
ing the System
Hold key and the
display
➩
Press the System Hold (SYSHOLD) key.
CALL PARKED IN SLOT and the number
of the slot to which the call has been
assigned are displayed.
➩
Hang up.
➩
Notify the party who will be retrieving the
call of the assigned slot number.
To place a call on
system hold on
any phone
➩
Press the Transfer (TRANSFR) key.
You will hear the confirmation tone,
followed by the dial tone.
➩
Dial * 8.
➩
Dial the number of the slot to which you
want to assign the call (0 through 9). 0n
display phones, CALL PARKED IN SLOT
and the number of the slot to which the call
has been assigned are displayed.
You will hear the confirmation tone.
➩
Hang up.
➩
Notify the party who will be retrieving the
call of the assigned slot number.
Note:
If you hear a busy tone, press the Connect key to return to your
party. Then try the whole procedure again using a different
slot number. If you hear a fast busy tone, there are no system
slots available at this time.