Troubleshooting guide

Making Calls 5-43
5. Making Calls
➩
Select
Save?
➩
To end setup, select “Exit?.
To set up a
station speed key
on a non-display
telephone
➩
Press the Station Speed (SPEED) key
twice.
You will hear the confirmation tone,
followed by the internal dial tone.
➩
Enter the station speed code you want to set
up (0 through 9, or 00 through 29 if you are
set up for more than 10 codes).
You will hear the confirmation tone.
➩
Enter the dialing sequence you want to
assign to the code.
➩
Hang up.
OR
➩
Get a dial tone.
➩
Dial # # 3.
➩
Enter the station speed code you want to set
up (0 through 9, or 00 through 29 if you are
set up for more than 10 codes).
You will hear the confirmation tone.
➩
Enter the dialing sequence you want to
assign to the code.
➩
Hang up.
Note:
You can also assign a dialing sequence to a repdial key. (See
“Repertory Dialing (Repdial)” on page 5-29.)