Troubleshooting guide

5-22 Optiset E Administrator Guide
Community (Com) Group Speaker Call
Community (Com) Group Speaker Call lets the user make a two-way
call to the speaker of another telephone in a community (com) group
by dialing a short code instead of an extension. If the party the user is
calling does not have a speakerphone, that party must pick up the
handset to answer.
If the party being called picks up the handset, the call is converted to a
regular call. If the party being called is busy, the caller will receive a
busy tone.
This feature is much like the Two-Way Speaker Call feature, except
that the party the user is calling must be a member of his or her
community (com) group. (See “Two-Way Speaker Call” on page
5-38.)
For more information about com groups, see “Community (Com)
Group Call” on page 5-21.
To make a com
group speaker
call
➩
Press the Intercom (INTRCOM) key, or get
a dial tone and dial * * 6.
➩
Dial the member’s com code.
➩
You will hear the confirmation tone. The
other party’s telephone will beep twice.
➩
Begin speaking. If the other party does not
have a speakerphone, they must pick up the
handset to answer. You and the other party
will hear repeated intrusion tones until they
pick up the handset or you hang up.
If you are a member of a com group and want to make intercom calls
to the same member often, you can set up an auto intercom repdial key.
To do this, set up a repdial key with the Intercom feature access code
(* * 6) followed by the com code of another member in your group.
(See “Repertory Dialing (Repdial)” on page 5-29.)