Troubleshooting guide

5-14 Optiset E Administrator Guide
To reconnect with
the first party
➩
If you have a display phone, scroll to
Toggle/Connect?
and select it.
Or, with any phone, press the Connect key.
You can continue to use the Toggle./
Connect feature to alternate between the
two parties.
If you then want to drop the second party
and reconnect with the first party, scroll to
Release and return?
and select it while you
are connected with the second party. Or
press the Clear key.
If you hang up before reconnecting to the
party on consultation hold, the
communications server will call you back
with triple rings to remind you that you
have a call waiting. Answer the call to re-
establish the connection.
Note:
You cannot dial a feature access code during a consultation
call, since pressing the Transfer key joins all parties in a
conference. Feature access codes are also not allowed during
conference calls. (See “Conference” on page 5-7.)