Operating instructions

Step by Step
Making and Answering Calls
22
Open ing the d oor wit h a code (at the doo r):
After ringing the bell, enter the five-digit code (using the
keypad or a DTMF transmitter). Depend ing on how the
door opener has been programmed, a doorbell call sig-
nal may or may not be forwarded.
Activating the door opener:
Press the key. The LED lights up
Select and confirm.
or
Enter the code.
Dial the entrance telephone number.
Enter the five-digit code. Default code = "00000".
or
Select the displayed function and press the "OK" dialog
key to change the code.
Select and confirm.
or
You can also open the door without a doorbell ring.
Deactivating the door opener:
Press the key. The LED lights up.
Select and confirm.
or
Enter the code.
Accepting a Call From an Answering
Machine
You can accept a call from any answering machine if the
machine is connected to your system (contact System
Support) and you have programmed the answering ma-
chine number on a key Æ page 54.
The LED lights up. Press the key.
Pr ogr am/Ser vice
*
89=Door op ener on?
3=change password?
1=enable with ring?
2=enable w/o ring?
Pr ogr am/Ser vice
#89=Door o pener off?