Operation Manual

©
Siemens AG 2003, E:\Auftrag\Siemens\MobilePhones\A62 Artemis V2\en\Artemis_Main.fm
left page (8) of A62 Artemis en, A31008-H5890-A1-2-7619 (29.12.2004, 11:22)
Setup
8
VAR Language: en; VAR issue date: 041111
Setup
Display
§Menu§ ¢ m ¢ Display
¢ Select a function.
Language
Set the language of the display text.
"Automatic" will set the language of your
home service provider. Reset to this lan-
guage in standby status:
*
# 0 0 0 0 #
A
Screensaver
The screensaver shows a picture on the
display as soon as a period that can be set
by you has elapsed. The function is ended
by an incoming call or by pressing any key.
Call setup
§Menu§ ¢ m ¢ Call setup
¢ Select a function.
Hide ID b
When switched off, the display of the call-
ing party shows your phone number (de-
pendent on service provider). To suppress
this display, you can activate the "Hide ID"
mode.
Call waiting b
If you are registered for this service, you
can check whether it is set and you can
activate/deactivate it with Call waiting.
Any to answer
Incoming calls can be accepted by press-
ing any key(except for
B).
Minute beep
During the call, you will hear a beep after
each minute as a reminder of the time
elapsed. The receipt does not hear the
beep.
Divert
You can set the conditions for which calls
are diverted to your mailbox or other
numbers.
§Menu§ ¢ m ¢ Divert
¢ Select a function.
Set up call divert (example)
All calls b
All calls are diverted. n is shown in the
top line of the display in standby mode.
Unanswered calls b
Includes Unanswered, Not reachable,
No reply, Busy.
§Select§ ¢ Set ¢ J (Enter the phone
number to which the call should be
diverted)
¢ §OK§
After a short pause, the setting is con-
firmed by the network.
Status check
After a short pause the current informa-
tion is shown.
p Condition set.
o Not set.
s
Display, if status is unknown
(e.g. on a new SIM card).
Clear all b
All set diversions are cleared.
Clock
§Menu§ ¢ m ¢ Clock
¢ Select a function.