User's Manual

30
Appendix
Gigaset A200 / IM eng / A31008-A200-J101-2-7619 / appendix.fm / 12.06.2003
Changing pause after line seizure
You can set the length of the pause that is inserted between pressing the talk key c
and sending the phone number (default setting: 3 secs.).
Changing pause after recall key (dialling pause)
You can change the length of the dialling pause if your PABX requires this (refer to your
PABX operating instructions).
Other Settings
Factory settings of handset
[_______________]
MENU
Press display key to open menu.
Press keys
N O 1 L. "916 SET" appears in
the display. The number for the currently set pause
length flashes. 1 = 1 sec.; 2 = 3 secs.; 3 = 7 secs.;
4 = 2.5 secs.
[______]
OK
Enter number and confirm.
[_______________]
MENU
Press display key to open menu.
Enter N O 1 2. "912 SET" appears in the dis-
play. The number for the currently set pause length
flashes.
1 = 800 ms; 2 = 1600 ms; 3 = 3200 ms.
[______]
OK
Enter number and confirm.
i
To insert a dialling pause between a prefix and a phone number: After
entering the prefix, hold down the
S key for 2 seconds. A "P" appears in
the display. Then enter the phone number.
Default settings Status after
reset
Description
Loudspeaker volume 1 1 page 25
Ringer volume 5 5 page 26
Ringtones 1 1 page 26
Directory empty unaffected page 14
Redial list empty empty page 17
Caller list empty unaffected page 18
Network ccess list empty unaffected page 14
Automatic call
acceptance
activated activated page 25
Battery warning tone activated activated page 26
Display language country specific country specific page 25,
page 31