Operating Instructions

Technical data
Technical data Actuator controls
A6V12052002
79 | 80
Service conditions
Corrosion protection
Standard
KS: Suitable for use in areas with high salinity,
almost permanent condensation, and high pollution.
Coating
Double layer poser coating
Two component iron-mica combination
Color
Standard
AUMA silver-grey (similar to RAL 7037)
Accessories
Wall bracket
For actuator controls mounted separately from the
actuator, including plug/socket connector.
Connecting cable on request.
Recommended for high ambient temperatures,
difficult access, or heavy vibration during service.
Cable length between actuator and actuator controls
is max. 100 m (Not suitable for version with
potentiometer in the actuator). Instead of the
potentiometer, the actuator must be equipped with
an electronic position transmitter. (MWG requires a
separate data cable.)
Programming software
AUMA CDT (Commissioning and Diagnostic Tool
for Windows-based PC)
AUMA Assistant App (Commissioning and
Diagnostic Tool for Android devices)
Torque measurement flange DMF
Accessory for torque measurement for SA/SAR 07.2
– SA/SAR 16.2
Further information
Weight
Approx. 7 kg (with AUMA plug/socket connector)
EU directives
Electromagnetic Compatibility (EMC): (2014/30/EU)
Low Voltage Directive: (2014/35/EU)
Machinery Directive: (2006/42/EC)