Operating Instructions

Commissioning (settings/options in the actuator)
Mechanical position indication using the indicator mark (not self-adjusting)
A6V12052002
59 | 80
Figure 53: Closed position.
3. Move the actuator to the end position OPEN.
4. Hold he lower indicator disc in position and turn the upper disc with the
(OPEN) symbol until it is in alignment with the mark on the cover.
Figure 54: Open position.
5. Move valve to end position CLOSED again.
6. Check settings:
If the symbol (CLOSED) is no longer in alignment with mark on the cover:
Repeat setting procedure.