Operating Instructions

Indications
Indications in the display
40 | 80
A6V12052002
● the number of indications occurred
● a blinking triangle with question mark after approximately 3 seconds
Figure 37: Out of specification..
For further information, see <Corrective action>.
Function check (S0009)
The S0009 indication shows function check indications according to NAMUR
recommendation NE 107.
If an indication has occurred using the function check, the display shows S0009:
● the number of indications occurred
● a blinking triangle with a wrench after approximately 3 seconds
Figure 38: Function check.
For further information, see <Corrective action>.
Maintenance required (S0010)
The S0010 indication shows maintenance indications according to NAMUR
recommendation NE 107.
If this indication has occurred, the display shows S0010:
● the number of indications occurred
● a blinking square with an oil can after approximately 3 seconds
Figure 39: Maintenance required.
For further information, see <Corrective action>.
Failure (S0011)
The S0011 indication shows the causes of the failure indication according to NAMUR
recommendation NE 107.
If this indication has occurred, the display shows S0011:
● the number of indications occurred
● a blinking circle with a cross after approximately 3 seconds