Operating Instructions

Assembly
Mounting positions of local controls
A6V12052002
21 | 80
NOTICE
Electrostatic discharge ESD!
Risk of damage to electronic components.
● Ground both operators and devices.
● Loosen screws and remove the local controls.
● Check if the O-ring is in good condition, correctly insert O-ring.
● Turn local controls into new position and re-place.
NOTICE
Cable damage due to twisting or pinching!
Risk of functional failures.
● Turn local controls by a maximum of 180°.
● Carefully assemble local controls to avoid pinching the cables.
● Fasten screws evenly crosswise.