Operating Instructions

Assembly
Mounting position
18 | 80
A6V12052002
Assembly
Mounting position
The A-Series Industrial Electric Actuators (AUMA) can be operated in any mounting
position.
Restriction: When using oil instead of grease within the actuator gear housing, the
hollow shaft mounting position must be perpendicular, with the flange pointing
downward. The type of lubricant used is indicated on the actuator name plate (F...=
grease; O...= oil).
Handwheel fitting Information
For transport reason, handwheels with a diameter of 15.75” (400 mm) and larger are
supplied separately within the scope of delivery.
Figure 7: Handwheel.
[1]
Spacer
[2]
Input shaft
[3]
Handwheel
[4]
Retaining ring
1. If required, fit spacer [1] on input shaft [2].
2. Slip handwheel [3] onto input shaft.
3. Secure handwheel [3] using the retaining ring [4] supplied.
Information
The retaining ring [4] (together with these operation instructions) is stored in a
weatherproof bag, which is attached to the device prior to delivery.