Operating Instructions

Technical data
Technical data Multi-turn actuators
74 | 80
A6V12052002
Service conditions
Vibration resistance according to
IEC 60068-2-6
2 g, from 10 to 200 Hz (for actuators in AUMA
NORM version)
1 g, from 10 to 200 Hz (for actuators with mounted
AUMA actuator controls)
Resistant to vibration during start-up or for failures of
the plant. However, a fatigue strength may not be
derived from this. Indications apply to actuators with
AUMA 3-phase AC motor and AUMA plug/socket
connector. They are not valid in combination with
gearboxes.
Corrosion protection
Standard
KS: Suitable for use in areas with high salinity,
almost permanent condensation, and high pollution.
Coating
Double layer powder coating
Two-component iron-mica combination
Color
Standard
AUMA silver-grey (similar to RAL 7037)
Lifetime
AUMA multi-turn actuators meet or exceed the
lifetime requirements of EN 15714-2. For further
details, contact AUMA.
Noise level
< 72 dB (A)
Further information
EU Directives
Electromagnetic Compatibility (EMC): (2014/30/EU)
Low Voltage Directive: (2014/35/EU)
Machinery Directive: (2006/42/EC)
Technical data for handwheel activation switches
Mechanical lifetime
10 starts
Silver plated contacts:
U min.
12 Vdc
U max.
250 Vdc
I max. AC current
3A at 250V (inductive load, cos phi = 0.8)
I max. DC current
3A at 12V (resistive load)