Operating Instructions

Safety instructions
Range of application
A6V12052002
7 | 80
Commissioning
Prior to working on this product, the staff must have thoroughly read and understood
these instructions and, furthermore, know and observe officially recognized rules
regarding occupational health and safety.
Prior to commissioning, it is important to check that all settings meet the requirements
of the application. Incorrect settings might present a danger to the application, for
example, cause damage to the valve or the installation. The manufacturer will not be
held liable for any consequential damage. Such risk lies entirely with the user.
Operation
Prerequisites for safe and smooth operation:
● Correct transport, proper storage, mounting and installation, as well as careful
commissioning.
● Only operate the device if it is in perfect condition while observing these
instructions.
● Immediately report any faults and damage and allow for corrective measures.
● Observe recognized rules for occupational health and safety.
● Observe national regulations.
● During operation, the housing warms up and surface temperatures >140°F (60°C)
may occur. To prevent possible burns, we recommend checking the surface
temperature using an appropriate thermometer and wearing protective gloves, if
required, prior to working on the device.
Protective measures
The end user or the contractor are responsible for implementing required protective
measures on site, such as enclosures, barriers, or personal protective equipment for
the staff.
Maintenance
To ensure safe device operation, follow the maintenance instructions included in this
manual.
Any device modification requires prior written consent of the manufacturer.
Range of application
AUMA multi-turn actuators are designed for the operation of Siemens resilient seat
butterfly valves.
Do not use for the following applications:
● Industrial trucks according to EN ISO 3691
● Lifting appliances according to EN 14502
● Passenger lifts according to DIN 15306 and 15309
● Service lifts according to EN 81-1/A1
● Escalators
● Continuous duty
● Buried service
● Continuous submersion (observe enclosure protection)
● Potentially explosive areas
● Radiation exposed areas in nuclear power plants
No liability can be assumed for inappropriate or unintended use.