Operating Instructions

Indications
Indications in the display
36 | 80
A6V12052002
[1]
List with detailed indications
[2]
Further available information
The navigation support (bottom row) fades out after approximately 3 seconds. Press
any push button (selector switch in the 0 (OFF) position) to fade-in the navigation
support.
Feedback indications from actuator and valve
Display indications depend on the actuator version.
Valve position (S0001)
● S0001 on the display indicates the valve position in % of the travel.
● The bar graph display appears after approximately 3 seconds.
● When issuing an operation command, an arrow indicates the direction
(OPEN/CLOSE).
Figure 26: Valve position and direction of operation.
Reaching adjusted end positions is also shown with symbols (CLOSED) and
(OPEN).
Figure 27: End position CLOSED/OPEN reached.
● 0% Actuator is in the CLOSED end position
● 100% Actuator is in the OPEN end position
Torque (S0002)
● S0002 on the display indicates the torque applied at the actuator output.
● The bar graph display appears after approximately 3 seconds.
Figure 28: Torque.
Select unit
Select the unit displayed (percent %, Newton meter Nm or "foot-pound" ft-lb) by using
the push button .