Operating Instructions

Operation
Language in the display
32 | 80
A6V12052002
Select main menu
1. Set selector switch to the 0 (OFF) position.
2. Press push button C Setup and hold it down for approximately 3 seconds.
– Display goes to main menu and indicates: ▶ Display...
Change passwords
◈
Select parameter Change passwords either:
● click via the menu to parameter, or
● using the direct display: press and enter ID M0229
● Display indicates: ▶ Change passwords
● The user level displays in the top row (1 through 6), for example:
For user level 1 (view only), passwords cannot be changed. To change passwords,
you must change to a higher user level. For this, enter a password using a parameter.
1. For a user level between 2 and 6: Press push button Ok.
– The display indicates the highest user level, for example.: For user 4
2. Select the user level using the Up ▲ Down ▼ push buttons, and confirm with
Ok.
– Display shows: ▶ Change passwords Password 0***
3. Enter current password (→ enter password).
– Display shows: ▶ Change passwords Password (new) 0***
4. Enter new password (→ enter password).
– Display shows: ▶ Change passwords For user 4 (example)
5. Select the next user level using the Up ▲ Down ▼ push buttons or cancel
the process by clicking Esc.
Language in the display
The AUMATIC actuator controls display is multilingual.
Changing the language
Display... M0009
Language M0049