Operating Instructions

Operation
User level, password
A6V12052002
31 | 80
Password
Enter a password to allow parameter modification. The display indicates:
Password 0***
Each user level has a specific password and permits different actions.
User levels and authorizations
Designation (user level)
Authorization/password
Observer (1)
Verify settings
No password required
Operator (2)
Change settings
Default factory password: 0000
Maintenance (3)
Reserved for future extensions
Specialist (4)
Change device configuration
For example, type of seating, assignment of output contacts
Default factory password: 0000
Service (5)
Service staff
Change configuration settings
AUMA (6)
AUMA administrator
Password entry
1. Select desired menu and hold down push button for approximately 3 seconds.
– Display indicates the set user level, for example, Observer (1)
2. Press Up ▲to select a higher user level and press Ok to confirm.
– Display shows: Password 0***
3. Use push buttons Up ▲ Down ▼ to select figures 0 to 9.
4. Confirm the first digit of the password using push button Ok.
5. Repeat Steps 1 and 2 for all further digits.
– Confirm the last digit with Ok.
Correct password entry allows access to all parameters within one user level.
Password change
Only the passwords of same or lower user level may be changed.
Example: The user is signed in as Specialist (4). This authorizes the user to modify
the passwords between user levels (1) to (4).
Device configuration M0053
Service functions M0222
Change passwords M0229
Menu point Service functions M0222 is only visible if user level has been set to
Specialist (4) or higher.