User's Manual

DISPLAYING DATA 2-7
Nameplate Info 2
Nameplate Info 2 displays the MGT’s acceptable operating temperature,
the amount of battery life left in the 9700 Power Meter, and the configured
demand settings.
Nameplate Info 3
Nameplate Info 3 displays the three lines of text that are written into the
9700 Power Meter’s Factory module. You can customize the text displayed
by configuring the Factory module’s Owner, Tag1 and Tag2 setup registers
in ION Designer. Nameplate Info 3 also shows the firmware revisions of
the 9700 Power Meter, the MGT and the X
PRESS CARD (if one exists), as well
as the optional auxiliary I/O board’s voltage level and the total amount of
memory in the 9700 Power Meter.
Date/Time Display
The MGT can be set to display the date, time and timezone. To display the
data and time, press
SETUP, then press DATE/TIME DISPLAY. You can exit the
date/time screen at any time by holding the
ESC button down for two
seconds.
238)
Additional information will
be displayed in the
Nameplate Info screens if
the MGT is used with
revenue-class 9700 Power
Meters.