Printer User Manual

Font design IBM Proprinter emulation
Programmer Reference Guide U26169-J-Z716-1-7600
© Siemens Nixdorf Informationssysteme AG 1995 Pfad: D:\SNI\Mackwitz\u26169\o26169e\26169E.K04
Set subscript/superscript mode
This command causes reduced-size characters to be superscripted (exponents) or
subscripted (indices).
Superscripted characters (exponents) are printed approx.
1
/
2
line up. Subscripted
characters (indices) are only reduced in size and printed on the base line.
p
1
defines subscript or superscript mode
Parameter values:
The menu setting must be INDEX/EXPONENT (see [2]).
Reset subscript/superscript mode
Control sequence Hexadecimal Decimal
ESC S p
1
1B 53 p
1
27 83 p
1
Dec Hex Meaning
0
1
48
49
00
01
30
31
Set superscript mode
Set subscript mode
Set superscript mode
Set subscript mode
Control sequence Hexadecimal Decimal
ESC T 1B 54 27 84
i