Printer User Manual

Forms layout IBM Proprinter emulation
Programmer Reference Guide U26169-J-Z716-1-7600
© Siemens Nixdorf Informationssysteme AG 1995 Pfad: D:\SNI\Mackwitz\u26169\o26169e\26169E.K04
Set left and right margins
The parameters define the first and last print columns of a line at the current character pitch
and thus define the left and right margins.
The first print column of a line is column 1. The set margins are not affected by later
changes of the character pitch. The margin setting should be selected so that at least
4
/
10
inch remain as print area between the left and right margins.
This command must be located at the beginning of the line.
If you specify 0 (zero) for a parameter, the current margin setting is not affected.
p
1
Left margin in columns at the current character pitch
p
2
Right margin in columns at the current character pitch
Control sequence Hexadecimal Decimal
ESC X p
1
p
2
1B 58 p
1
p
2
27 88 p
1
p
2
Range: X’00 ≤ p
1
≤ X’FC
Range: X’04 ≤ p
2
≤ X’FF