Printer User Manual

Forms transport mechanism IBM Proprinter emulation
Programmer Reference Guide U26169-J-Z716-1-7600
© Siemens Nixdorf Informationssysteme AG 1995 Pfad: D:\SNI\Mackwitz\u26169\o26169e\26169E.K04
Forms transport mechanism
The printer is always equipped with two continous forms tractors. The last sheet of a conti-
nuous forms stack can be printed to the end of the form.
Additional commands
Eject sheet
This command causes a vertical form feed to the beginning of the next page.
Select paper source and ejection, number of copies, cut-off mode
(SPS or SPSIF)
The control character > should only be used if an indent or a form feed (FF) is to be
performed.
p
4
= 0 to 1 is only available for the 9015 printer with cut-off feature.
Control sequence Hexadecimal Decimal
ESC [ < s 1B 5B 3C 73 27 91 60 115
Control sequence Hexadecimal Decimal
ESC [ > p
1
; p
2 ;
p
3 ;
p
4
s1B 5B 3E p
1
3B p
2
3B p
3
3B
p
4
73
27 91 62 p
1
59 p
2
59 p
3
59 p
4
115
i
i